What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
What are your thoughts about What Would Cause My Electric Water Heater to Stop Working??
Many modern-day residences use an electrical water heater for their heating unit, due to its ease and also simplicity of use. Nevertheless, just like any other electrical devices, issues may emerge with its use, suddenly. It can be truly frustrating to get up to a chilly shower instead of a warm one or having your bath with water that isn't warm sufficient or even also warm. Whatever the case may be, water heater troubles can be quite aggravating. Luckily, we've made a listing of possible solutions to your hot water heater problems. There are a number of variables that might cause many of these troubles, it could be an issue with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for safety. Whatever the trouble is, getting it repaired need to not position too much of a problem if you follow these actions:
Check Your Power Supply:
As standard as this may appear, it is extremely necessary. Without appropriate power, your water heater will certainly not function. So the first thing to do when your water instantly stops working is to validate that it isn't a power issue. Examine if the fuse is blown out or the breaker tripped. If the breaker is the problem, merely turn it on and off again. Change any busted or worn-out fuse. Check the appliance with power after these modifications to see if it's currently working.
Examine the Burner in the Hot Water Heater:
If it's not a power trouble, then try looking into your heating element if it is still working. Examine each of your burner to be sure the problem isn't with any one of them. If any one of them is faulty, replace that component and afterwards check whether the hot water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't hot sufficient, you might need to check the temperature setups on your top thermostat. Ensure the circuit breaker is switched off prior to doing anything. Open up the access panel and press the red button for temperature level reset over the thermostat. This need to help heat the water. Turn the breaker back on as well as inspect if the trouble has been dealt with.
Call An Expert:
If after changing all damaged parts as well as resetting your temperature level, the hot water heater still isn't working, you may need to speak to a specialist plumber for a specialist point of view. The trouble with your heating system could be that the cold and hot taps have been switched or it may be undersized for the amount of hot water needed in your home. Whatever the case may be, a professional plumber would help solve the problem.
Conclusion
Water heater problems are not always major. A lot of them are due to minor issues like a blown fuse or worn-out heating element. Changing the damaged components need to suffice. Nonetheless, if you are still incapable to resolve the issue, give a call to your closest plumber to come to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a serious person who reads on No Hot Water — Water Heater Repair, I figured sharing that chunk was beneficial. You should take the opportunity to share this entry if you liked it. Thanks for your time. Don't hesitate to stop by our website back soon.
Click Here To Find Out More
Report this page